Always-Incorrect Control Flow ImplementationCWE-670
| CVE ID | CVSS | Vendor | Exploit | Patch | Trends |
|---|---|---|---|---|---|
CVE-2024-5659Rockwell Automation was made aware of a vulnerability that causes all affected controllers on the same network to result in a major nonrecoverable fault(MNRF/Assert). This vulnerability could be exploited by sending abnormal packets to the mDNS port. If exploited, the availability of the device would be compromised. | CVSS Low | Rockwellautomation | - | - |  |
CVE-2024-47763Wasmtime is an open source runtime for WebAssembly. Wasmtime's implementation of WebAssembly tail calls combined with stack traces can result in a runtime crash in certain WebAssembly modules. The runtime crash may be undefined behavior if Wasmtime was compiled with Rust 1.80 or prior. The runtime crash is a deterministic process abort when Wasmtime is compiled with Rust 1.81 and later. WebAssembly tail calls are a proposal which relatively recently reached stage 4 in the standardization process. Wasmtime first enabled support for tail calls by default in Wasmtime 21.0.0, although that release contained a bug where it was only on-by-default for some configurations. In Wasmtime 22.0.0 tail calls were enabled by default for all configurations. The specific crash happens when an exported function in a WebAssembly module (or component) performs a `return_call` (or `return_call_indirect` or `return_call_ref`) to an imported host function which captures a stack trace (for example, the host function raises a trap). In this situation, the stack-walking code previously assumed there was always at least one WebAssembly frame on the stack but with tail calls that is no longer true. With the tail-call proposal it's possible to have an entry trampoline appear as if it directly called the exit trampoline. This situation triggers an internal assert in the stack-walking code which raises a Rust `panic!()`. When Wasmtime is compiled with Rust versions 1.80 and prior this means that an `extern "C"` function in Rust is raising a `panic!()`. This is technically undefined behavior and typically manifests as a process abort when the unwinder fails to unwind Cranelift-generated frames. When Wasmtime is compiled with Rust versions 1.81 and later this panic becomes a deterministic process abort. Overall the impact of this issue is that this is a denial-of-service vector where a malicious WebAssembly module or component can cause the host to crash. There is no other impact at this time other than availability of a service as the result of the crash is always a crash and no more. This issue was discovered by routine fuzzing performed by the Wasmtime project via Google's OSS-Fuzz infrastructure. We have no evidence that it has ever been exploited by an attacker in the wild. All versions of Wasmtime which have tail calls enabled by default have been patched: * 21.0.x - patched in 21.0.2 * 22.0.x - patched in 22.0.1 * 23.0.x - patched in 23.0.3 * 24.0.x - patched in 24.0.1 * 25.0.x - patched in 25.0.2. Wasmtime versions from 12.0.x (the first release with experimental tail call support) to 20.0.x (the last release with tail-calls off-by-default) have support for tail calls but the support is disabled by default. These versions are not affected in their default configurations, but users who explicitly enabled tail call support will need to either disable tail call support or upgrade to a patched version of Wasmtime. The main workaround for this issue is to disable tail support for tail calls in Wasmtime, for example with `Config::wasm_tail_call(false)`. Users are otherwise encouraged to upgrade to patched versions. | CVSS 5.5 | Bytecodealliance | Exploit | Patched |  |
CVE-2024-47745In the Linux kernel, the following vulnerability has been resolved:
mm: call the security_mmap_file() LSM hook in remap_file_pages()
The remap_file_pages syscall handler calls do_mmap() directly, which
doesn't contain the LSM security check. And if the process has called
personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for
RW pages, this will actually result in remapping the pages to RWX,
bypassing a W^X policy enforced by SELinux.
So we should check prot by security_mmap_file LSM hook in the
remap_file_pages syscall handler before do_mmap() is called. Otherwise, it
potentially permits an attacker to bypass a W^X policy enforced by
SELinux.
The bypass is similar to CVE-2016-10044, which bypass the same thing via
AIO and can be found in [1].
The PoC:
$ cat > test.c
int main(void) {
size_t pagesz = sysconf(_SC_PAGE_SIZE);
int mfd = syscall(SYS_memfd_create, "test", 0);
const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE,
MAP_SHARED, mfd, 0);
unsigned int old = syscall(SYS_personality, 0xffffffff);
syscall(SYS_personality, READ_IMPLIES_EXEC | old);
syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0);
syscall(SYS_personality, old);
// show the RWX page exists even if W^X policy is enforced
int fd = open("/proc/self/maps", O_RDONLY);
unsigned char buf2[1024];
while (1) {
int ret = read(fd, buf2, 1024);
if (ret <= 0) break;
write(1, buf2, ret);
}
close(fd);
}
$ gcc test.c -o test
$ ./test | grep rwx
7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted)
[PM: subject line tweaks] | CVSS 7.8 | Linux | - | Patched |  |
CVE-2024-47168What kind of vulnerability is it? Who is impacted? This vulnerability involves data exposure due to the enable_monitoring flag not properly disabling monitoring when set to False. Even when monitoring is supposedly disabled, an attacker or unauthorized user can still access the monitoring dashboard by directly requesting the /monitoring endpoint. This means that sensitive application analytics may still be exposed, particularly in environments where monitoring is expected to be disabled. Users who set enable_monitoring=False to prevent unauthorized access to monitoring data are impacted. | CVSS 4.3 | Gradio project | - | Patched |  |
CVE-2024-45807Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy's 1.31 is using `oghttp` as the default HTTP/2 codec, and there are potential bugs around stream management in the codec. To resolve this Envoy will switch off the `oghttp2` by default. The impact of this issue is that envoy will crash. This issue has been addressed in release version 1.31.2. All users are advised to upgrade. There are no known workarounds for this issue. | CVSS 7.5 | Divx, et al | - | Patched |  |
CVE-2024-45311Quinn is a pure-Rust, async-compatible implementation of the IETF QUIC transport protocol. As of quinn-proto 0.11, it is possible for a server to `accept()`, `retry()`, `refuse()`, or `ignore()` an `Incoming` connection. However, calling `retry()` on an unvalidated connection exposes the server to a likely panic in the following situations: 1. Calling `refuse` or `ignore` on the resulting validated connection, if a duplicate initial packet is received. This issue can go undetected until a server's `refuse()`/`ignore()` code path is exercised, such as to stop a denial of service attack. 2. Accepting when the initial packet for the resulting validated connection fails to decrypt or exhausts connection IDs, if a similar initial packet that successfully decrypts and doesn't exhaust connection IDs is received. This issue can go undetected if clients are well-behaved. The former situation was observed in a real application, while the latter is only theoretical. | CVSS 7.5 | Quinn project | - | Patched |  |
CVE-2024-45304Cairo-Contracts are OpenZeppelin Contracts written in Cairo for Starknet, a decentralized ZK Rollup. This vulnerability can lead to unauthorized ownership transfer, contrary to the original owner's intention of leaving the contract without an owner. It introduces a security risk where an unintended party (pending owner) can gain control of the contract after the original owner has renounced ownership. This could also be used by a malicious owner to simulate leaving a contract without an owner, to later regain ownership by previously having proposed himself as a pending owner. This issue has been addressed in release version 0.16.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. | CVSS 6.5 | Openzeppelin | - | Patched |  |
CVE-2024-45298Wiki.js is an open source wiki app built on Node.js. A disabled user can still gain access to a wiki by abusing the password reset function. While setting up SMTP e-mail's on my server, I tested said e-mails by performing a password reset with my test user. To my shock, not only did it let me reset my password, but after resetting my password I can get into the wiki I was locked out of. The ramifications of this bug is a user can **bypass an account disabling by requesting their password be reset**. All users of wiki.js version `2.5.303` who use any account restrictions and have disabled user are affected. This issue has been addressed in version 2.5.304 and all users are advised to upgrade. There are no known workarounds for this vulnerability. | CVSS 4.3 | Requarks | - | - |  |
CVE-2024-38365The btcd Bitcoin client (versions 0.10 to 0.24) did not correctly re-implement Bitcoin Core's "FindAndDelete()" functionality. This
logic is consensus-critical: the difference in behavior with the other Bitcoin clients can lead to btcd clients accepting an invalid Bitcoin block (or rejecting a valid one). This consensus failure can be leveraged to cause a chain split (accepting an invalid Bitcoin block) or be exploited to DoS the btcd nodes (rejecting a valid Bitcoin block). An attacker can create a standard transaction where FindAndDelete doesn't return a match but removeOpCodeByData does making btcd get a different sighash, leading to a chain split. Importantly, this vulnerability can be exploited remotely by any Bitcoin user and does not require any hash power. This is because the difference in behavior can be triggered by a "standard" Bitcoin
transaction, that is a transaction which gets relayed through the P2P network before it gets included in a Bitcoin block. FindAndDelete vs. removeOpcodeByData removeOpcodeByData(script []byte, dataToRemove []byte) removes any data pushes from script that contain dataToRemove. However, FindAndDelete only removes exact matches. So for example, with script = "<data> <data||foo>" and dataToRemove = "data" btcd will remove both data pushes but Bitcoin Core's FindAndDelete only removes the first <data> push. | CVSS 7.4 | Btcd project | - | Patched |  |
CVE-2024-37153Evmos is the Ethereum Virtual Machine (EVM) Hub on the Cosmos Network. There is an issue with how to liquid stake using Safe which itself is a contract. The bug only appears when there is a local state change together with an ICS20 transfer in the same function and uses the contract's balance, that is using the contract address as the sender parameter in an ICS20 transfer using the ICS20 precompile. This is in essence the "infinite money glitch" allowing contracts to double the supply of Evmos after each transaction.The issue has been patched in versions >=V18.1.0. | CVSS 7.5 | Evmos | Exploit | Patched |  |
CVE-2024-35312In Tor Arti before 1.2.3, STUB circuits incorrectly have a length of 2 (with lite vanguards), aka TROVE-2024-003. | CVSS 6.2 | - | Patched |  | |
CVE-2024-35195When making requests through a Requests Session, if the first request is made with verify=False to disable cert verification, all subsequent requests to the same origin will continue to ignore cert verification regardless of changes to the value of verify. This behavior will continue for the lifecycle of the connection in the connection pool. | CVSS 5.6 | Python-requests | - | Patched |  |
CVE-2024-35190Asterisk is an open source private branch exchange and telephony toolkit. After upgrade to 18.23.0, ALL unauthorized SIP requests are identified as PJSIP Endpoint of local asterisk server. This vulnerability is fixed in 18.23.1, 20.8.1, and 21.3.1.
| CVSS 5.8 | - | - |  | |
CVE-2024-33431An issue in phiola/src/afilter/conv.c:115 of phiola v2.0-rc22 allows a remote attacker to cause a denial of service via a crafted .wav file. | CVSS 6.5 | - | - |  | |
CVE-2024-32971Apollo Router is a configurable, graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. The affected versions of Apollo Router contain a bug that in limited circumstances, could lead to unexpected operations being executed which can result in unintended data or effects. This only affects Router instances configured to use distributed query plan caching. The root cause of this defect is a bug in Apollo Router’s cache retrieval logic: When this defect is present and distributed query planning caching is enabled, asking the Router to execute an operation (whether it is a query, a mutation, or a subscription) may result in an unexpected variation of that operation being executed or the generation of unexpected errors. The issue stems from inadvertently executing a modified version of a previously executed operation, whose query plan is stored in the underlying cache (specifically, Redis). Depending on the type of the operation, the result may vary. For a query, results may be fetched that don’t match what was requested (e.g., rather than running `fetchUsers(type: ENTERPRISE)` the Router may run `fetchUsers(type: TRIAL)`. For a mutation, this may result in incorrect mutations being sent to underlying subgraph servers (e.g., rather than sending `deleteUser(id: 10)` to a subgraph, the Router may run `deleteUser(id: 12)`. Users who are using distributed query plan caching, are advised to either upgrade to version 1.45.1 or above or downgrade to version 1.43.2 of the Apollo Router. Apollo Router versions 1.44.0 or 1.45.0 are not recommended for use and have been withdrawn. Users unable to upgrade can disable distributed query plan caching to mitigate this issue. | CVSS 9 | Apollographql | - | Patched |  |
CVE-2024-32896there is a possible way to bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. | CVSS 7.8 | Exploit | Patched |  | |
CVE-2024-30246Tuleap is an Open Source Suite to improve management of software developments and collaboration. A malicious user could exploit this issue on purpose to delete information on the instance or possibly gain access to restricted artifacts. It is however not possible to control exactly which information is deleted. Information from theDate, File, Float, Int, List, OpenList, Text, and Permissions on artifact (this one can lead to the disclosure of restricted information) fields can be impacted. This vulnerability is fixed in Tuleap Community Edition version 15.7.99.6 and Tuleap Enterprise Edition 15.7-2, 15.6-5, 15.5-6, 15.4-8, 15.3-6, 15.2-5, 15.1-9, 15.0-9, and 14.12-6. | CVSS 7.6 | Tuleap | - | - |  |
CVE-2024-30133HCL Traveler for Microsoft Outlook (HTMO) is susceptible to a control flow vulnerability. The application does not sufficiently manage its control flow during execution, creating conditions in which the control flow can be modified in unexpected ways. | CVSS 5.3 | - | - |  | |
CVE-2024-25622h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. The configuration directives provided by the headers handler allows users to modify the response headers being sent by h2o. The configuration file of h2o has scopes, and the inner scopes (e.g., path level) are expected to inherit the configuration defined in outer scopes (e.g., global level). However, if a header directive is used in the inner scope, all the definition in outer scopes are ignored. This can lead to headers not being modified as expected. Depending on the headers being added or removed unexpectedly, this behavior could lead to unexpected client behavior. This vulnerability is fixed in commit 123f5e2b65dcdba8f7ef659a00d24bd1249141be. | CVSS 4.3 | H2o, et al | Exploit | Patched |  |
CVE-2024-20480A vulnerability in the DHCP Snooping feature of Cisco IOS XE Software on Software-Defined Access (SD-Access) fabric edge nodes could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition that requires a manual reload to recover.
This vulnerability is due to improper handling of IPv4 DHCP packets. An attacker could exploit this vulnerability by sending certain IPv4 DHCP packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition that requires a manual reload to recover. | CVSS 8.6 | Cisco | - | Patched |  |
CVE-2024-0313A malicious insider exploiting this vulnerability can circumvent existing security controls put in place by the organization. On the contrary, if the victim is legitimately using the temporary bypass to reach out to the Internet for retrieving application and system updates, a remote device could target it and undo the bypass, thereby denying the victim access to the update service, causing it to fail. | CVSS 5.5 | - | - |  | |
CVE-2023-49798OpenZeppelin Contracts is a library for smart contract development. A merge issue when porting the 5.0.1 patch to the 4.9 branch caused a line duplication. In the version of `Multicall.sol` released in `@openzeppelin/contracts@4.9.4` and `@openzeppelin/contracts-upgradeable@4.9.4`, all subcalls are executed twice. Concretely, this exposes a user to unintentionally duplicate operations like asset transfers. The duplicated delegatecall was removed in version 4.9.5. The 4.9.4 version is marked as deprecated. Users are advised to upgrade. There are no known workarounds for this issue. | CVSS 5.9 | Openzeppelin | - | Patched |  |
CVE-2023-45292When using the default implementation of Verify to check a Captcha, verification can be bypassed. For example, if the first parameter is a non-existent id, the second parameter is an empty string, and the third parameter is true, the function will always consider the Captcha to be correct. | CVSS 5.3 | Mojotv | Exploit | Patched |  |
CVE-2023-41376Nokia Service Router Operating System (SR OS) 22.10 and SR Linux, when error-handling update-fault-tolerance is not enabled, mishandle BGP path attributes. | CVSS 7.5 | Nokia | Exploit | - |  |
CVE-2023-41338Fiber is an Express inspired web framework built in the go language. Versions of gofiber prior to 2.49.2 did not properly restrict access to localhost. This issue impacts users of our project who rely on the `ctx.IsFromLocal` method to restrict access to localhost requests. If exploited, it could allow unauthorized access to resources intended only for localhost. Setting `X-Forwarded-For: 127.0.0.1` in a request from a foreign host, will result in true for `ctx.IsFromLocal`. Access is limited to the scope of the affected process. This issue has been patched in version `2.49.2` with commit `b8c9ede6`. Users are advised to upgrade. There are no known workarounds to remediate this vulnerability without upgrading to the patched version. | CVSS 5.3 | - | Patched |  | |
CVE-2023-41058Parse Server is an open source backend server. In affected versions the Parse Cloud trigger `beforeFind` is not invoked in certain conditions of `Parse.Query`. This can pose a vulnerability for deployments where the `beforeFind` trigger is used as a security layer to modify the incoming query. The vulnerability has been fixed by refactoring the internal query pipeline for a more concise code structure and implementing a patch to ensure the `beforeFind` trigger is invoked. This fix was introduced in commit `be4c7e23c6` and has been included in releases 6.2.2 and 5.5.5. Users are advised to upgrade. Users unable to upgrade should make use of parse server's security layers to manage access levels with Class-Level Permissions and Object-Level Access Control that should be used instead of custom security layers in Cloud Code triggers. | CVSS 7.5 | Parseplatform | - | Patched |  |
CVE-2023-41052Vyper is a Pythonic Smart Contract Language. In affected versions the order of evaluation of the arguments of the builtin functions `uint256_addmod`, `uint256_mulmod`, `ecadd` and `ecmul` does not follow source order. This behaviour is problematic when the evaluation of one of the arguments produces side effects that other arguments depend on. A patch is currently being developed on pull request #3583. When using builtins from the list above, users should make sure that the arguments of the expression do not produce side effects or, if one does, that no other argument is dependent on those side effects. | CVSS 5.3 | Vyperlang | Exploit | Patched |  |
CVE-2023-40015Vyper is a Pythonic Smart Contract Language. For the following (probably non-exhaustive) list of expressions, the compiler evaluates the arguments from right to left instead of left to right. `unsafe_add, unsafe_sub, unsafe_mul, unsafe_div, pow_mod256, |, &, ^ (bitwise operators), bitwise_or (deprecated), bitwise_and (deprecated), bitwise_xor (deprecated), raw_call, <, >, <=, >=, ==, !=, in, not in (when lhs and rhs are enums)`. This behaviour becomes a problem when the evaluation of one of the arguments produces side effects that other arguments depend on. The following expressions can produce side-effect: state modifying external call , state modifying internal call, `raw_call`, `pop()` when used on a Dynamic Array stored in the storage, `create_minimal_proxy_to`, `create_copy_of`, `create_from_blueprint`. This issue has not yet been patched. Users are advised to make sure that the arguments of the expression do not produce side effects or, if one does, that no other argument is dependent on those side effects. | CVSS 5.3 | Vyperlang | Exploit | Patched |  |
CVE-2023-39152Always-incorrect control flow implementation in Jenkins Gradle Plugin 2.8 may result in credentials not being masked (i.e., replaced with asterisks) in the build log in some circumstances. | CVSS 6.5 | Jenkins | - | Patched |  |
CVE-2023-32675Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. In contracts with more than one regular nonpayable function, it is possible to send funds to the default function, even if the default function is marked `nonpayable`. This applies to contracts compiled with vyper versions prior to 0.3.8. This issue was fixed by the removal of the global `calldatasize` check in commit `02339dfda`. Users are advised to upgrade to version 0.3.8. Users unable to upgrade should avoid use of nonpayable default functions. | CVSS 5.3 | Vyperlang | Exploit | Patched |  |
CVE-2023-31211Insufficient authentication flow in Checkmk before 2.2.0p17, 2.1.0p37 and 2.0.0p39 allows attacker to use locked credentials | CVSS 6.5 | Tribe29, et al | - | Patched |  |
CVE-2023-30629Vyper is a Pythonic Smart Contract Language for the ethereum virtual machine. In versions 0.3.1 through 0.3.7, the Vyper compiler generates the wrong bytecode. Any contract that uses the `raw_call` with `revert_on_failure=False` and `max_outsize=0` receives the wrong response from `raw_call`. Depending on the memory garbage, the result can be either `True` or `False`. A patch is available and, as of time of publication, anticipated to be part of Vyper 0.3.8. As a workaround, one may always put `max_outsize>0`. | CVSS 7.5 | Vyperlang | Exploit | Patched |  |
CVE-2023-28711Insufficient control flow management in the Hyperscan Library maintained by Intel(R) before version 5.4.1 may allow an authenticated user to potentially enable denial of service via local access. | CVSS 5.5 | Intel | - | Patched |  |
CVE-2023-23623Electron is a framework which lets you write cross-platform desktop applications using JavaScript, HTML and CSS. A Content-Security-Policy that disables eval, specifically setting a `script-src` directive and _not_ providing `unsafe-eval` in that directive, is not respected in renderers that have sandbox disabled. i.e. `sandbox: false` in the `webPreferences` object. This allows usage of methods like `eval()` and `new Function` unexpectedly which can result in an expanded attack surface. This issue only ever affected the 22 and 23 major versions of Electron and has been fixed in the latest versions of those release lines. Specifically, these versions contain the fixes: 22.0.1 and 23.0.0-alpha.2 We recommend all apps upgrade to the latest stable version of Electron. If upgrading isn't possible, this issue can be addressed without upgrading by enabling `sandbox: true` on all renderers. | CVSS 9.8 | Electronjs | - | Patched |  |
CVE-2023-20921In onPackageRemoved of AccessibilityManagerService.java, there is a possibility to automatically grant accessibility services due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-243378132 | CVSS 7.3 | Exploit | Patched |  | |
CVE-2023-20915In addOrReplacePhoneAccount of PhoneAccountRegistrar.java, there is a possible way to enable a phone account without user interaction due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-246930197 | CVSS 7.8 | - | Patched |  | |
CVE-2023-1668A flaw was found in openvswitch (OVS). When processing an IP packet with protocol 0, OVS will install the datapath flow without the action modifying the IP header. This issue results (for both kernel and userspace datapath) in installing a datapath flow matching all IP protocols (nw_proto is wildcarded) for this flow, but with an incorrect action, possibly causing incorrect handling of other IP packets with a != 0 IP protocol that matches this dp flow. | CVSS 8.2 | Debian, et al | - | Patched |  |
CVE-2022-45196Hyperledger Fabric 2.3 allows attackers to cause a denial of service (orderer crash) by repeatedly sending a crafted channel tx with the same Channel name. NOTE: the official Fabric with Raft prevents exploitation via a locking mechanism and a check for names that already exist. | CVSS 7.5 | Hyperledger | Exploit | Patched |  |
CVE-2022-41884TensorFlow is an open source platform for machine learning. If a numpy array is created with a shape such that one element is zero and the others sum to a large number, an error will be raised. We have patched the issue in GitHub commit 2b56169c16e375c521a3bc8ea658811cc0793784. The fix will be included in TensorFlow 2.11. We will also cherrypick this commit on TensorFlow 2.10.1, 2.9.3, and TensorFlow 2.8.4, as these are also affected and still in supported range. | CVSS 7.5 | Exploit | Patched |  | |
CVE-2022-39354SputnikVM, also called evm, is a Rust implementation of Ethereum Virtual Machine. A custom stateful precompile can use the `is_static` parameter to determine if the call is executed in a static context (via `STATICCALL`), and thus decide if stateful operations should be done. Prior to version 0.36.0, the passed `is_static` parameter was incorrect -- it was only set to `true` if the call came from a direct `STATICCALL` opcode. However, once a static call context is entered, it should stay static. The issue only impacts custom precompiles that actually uses `is_static`. For those affected, the issue can lead to possible incorrect state transitions. Version 0.36.0 contains a patch. There are no known workarounds. | CVSS 7.5 | Evm project | - | Patched |  |
CVE-2022-36278Insufficient control flow management in the Intel(R) Battery Life Diagnostic Tool software before version 2.2.0 may allow an authenticated user to potentially enable escalation of privilege via local access. | CVSS 7.8 | Intel | - | Patched |  |
CVE-2022-36072SilverwareGames.io is a social network for users to play video games online. In version 1.1.8 and prior, due to an unobvious feature of PHP, hashes generated by built-in functions and starting with the `0e` symbols were being handled as zero multiplied with the `e` number. Therefore, the hash value was equal to 0. The maintainers fixed this in version 1.1.9 by using `===` instead of `==` in comparisons where it is possible (e.g. on sign in/sign up handlers). | CVSS 5.9 | Silverwaregames | - | - |  |
CVE-2022-35917Solana Pay is a protocol and set of reference implementations that enable developers to incorporate decentralized payments into their apps and services. When a Solana Pay transaction is located using a reference key, it may be checked to represent a transfer of the desired amount to the recipient, using the supplied `validateTransfer` function. An edge case regarding this mechanism could cause the validation logic to validate multiple transfers. This issue has been patched as of version `0.2.1`. Users of the Solana Pay SDK should upgrade to it. There are no known workarounds for this issue. | CVSS 5.3 | Solanalabs | - | Patched |  |
CVE-2022-31116UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Affected versions were found to improperly decode certain characters. JSON strings that contain escaped surrogate characters not part of a proper surrogate pair were decoded incorrectly. Besides corrupting strings, this allowed for potential key confusion and value overwriting in dictionaries. All users parsing JSON from untrusted sources are vulnerable. From version 5.4.0, UltraJSON decodes lone surrogates in the same way as the standard library's `json` module does, preserving them in the parsed output. Users are advised to upgrade. There are no known workarounds for this issue. | CVSS 7.5 | Fedoraproject, et al | Exploit | Patched |  |
CVE-2022-31111Frontier is Substrate's Ethereum compatibility layer. In affected versions the truncation done when converting between EVM balance type and Substrate balance type was incorrectly implemented. This leads to possible discrepancy between appeared EVM transfer value and actual Substrate value transferred. It is recommended that an emergency upgrade to be planned and EVM execution temporarily paused in the mean time. The issue is patched in Frontier master branch commit fed5e0a9577c10bea021721e8c2c5c378e16bf66 and polkadot-v0.9.22 branch commit e3e427fa2e5d1200a784679f8015d4774cedc934. This vulnerability affects only EVM internal states, but not Substrate balance states or node. You can temporarily pause EVM execution (by setting up a Substrate `CallFilter` that disables `pallet-evm` and `pallet-ethereum` calls before the patch can be applied. | CVSS 5.3 | Parity | - | Patched |  |
CVE-2022-31017Zulip is an open-source team collaboration tool. Versions 2.1.0 through and including 5.2 are vulnerable to a logic error. A stream configured as private with protected history, where new subscribers should not be allowed to see messages sent before they were subscribed, when edited causes the server to incorrectly send an API event that includes the edited message to all of the stream’s current subscribers. This API event is ignored by official clients, but can be observed by using a modified client or the browser’s developer tools. This bug will be fixed in Zulip Server 5.3. There are no known workarounds. | CVSS 2.6 | Zulip | - | - |  |
CVE-2022-29609An issue was discovered in ONOS 2.5.1. An intent with the same source and destination shows the INSTALLING state, indicating that its flow rules are installing. Improper handling of such an intent is misleading to a network operator. | CVSS 5.3 | Opennetworking | Exploit | - |  |
CVE-2022-29607An issue was discovered in ONOS 2.5.1. Modification of an existing intent to have the same source and destination shows the INSTALLED state without any flow rule. Improper handling of such an intent is misleading to a network operator. | CVSS 7.5 | Opennetworking | Exploit | - |  |
CVE-2022-29605An issue was discovered in ONOS 2.5.1. IntentManager attempts to install the IPv6 flow rules of an intent into an OpenFlow 1.0 switch that does not support IPv6. Improper handling of the difference in capabilities of the intent and switch is misleading to a network operator. | CVSS 7.5 | Opennetworking | Exploit | - |  |
CVE-2022-29255Vyper is a Pythonic Smart Contract Language for the ethereum virtual machine. In versions prior to 0.3.4 when a calling an external contract with no return value, the contract address (including side effects) could be evaluated twice. This may result in incorrect outcomes for contracts. This issue has been addressed in v0.3.4. | CVSS 7.5 | Vyperlang | Exploit | Patched |  |
CVE-2022-27808Insufficient control flow management in some Intel(R) Ethernet Controller Administrative Tools drivers for Windows before version 1.5.0.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | CVSS 7.8 | - | Patched |  | |
CVE-2022-26890On F5 BIG-IP Advanced WAF, ASM, and APM 16.1.x versions prior to 16.1.2.1, 15.1.x versions prior to 15.1.5, 14.1.x versions prior to 14.1.4.6, and 13.1.x versions prior to 13.1.5, when ASM or Advanced WAF, as well as APM, are configured on a virtual server, the ASM policy is configured with Session Awareness, and the "Use APM Username and Session ID" option is enabled, undisclosed requests can cause the bd process to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated | CVSS 7.5 | F5 | - | Patched |  |
CVE-2022-26841Insufficient control flow management for the Intel(R) SGX SDK software for Linux before version 2.16.100.1 may allow an authenticated user to potentially enable information disclosure via local access. | CVSS 5.5 | - | Patched |  | |
CVE-2022-25745Memory corruption in modem due to improper input validation while handling the incoming CoAP message | CVSS 9.8 | Qualcomm | - | Patched |  |
CVE-2022-21679Istio is an open platform to connect, manage, and secure microservices. In Istio 1.12.0 and 1.12.1 The authorization policy with hosts and notHosts might be accidentally bypassed for ALLOW action or rejected unexpectedly for DENY action during the upgrade from 1.11 to 1.12.0/1.12.1. Istio 1.12 supports the hosts and notHosts fields in authorization policy with a new Envoy API shipped with the 1.12 data plane. A bug in the 1.12.0 and 1.12.1 incorrectly uses the new Envoy API with the 1.11 data plane. This will cause the hosts and notHosts fields to be always matched regardless of the actual value of the host header when mixing 1.12.0/1.12.1 control plane and 1.11 data plane. Users are advised to upgrade or to not mix the 1.12.0/1.12.1 control plane with 1.11 data plane if using hosts or notHosts field in authorization policy. | CVSS 6.8 | Istio | - | Patched |  |
CVE-2022-21655Envoy is an open source edge and service proxy, designed for cloud-native applications. The envoy common router will segfault if an internal redirect selects a route configured with direct response or redirect actions. This will result in a denial of service. As a workaround turn off internal redirects if direct response entries are configured on the same listener. | CVSS 7.5 | Envoyproxy | - | Patched |  |
CVE-2021-45852An issue was discovered in Projectworlds Hospital Management System v1.0. Unauthorized malicious attackers can add patients without restriction via add_patient.php. | CVSS 5.3 | Projectworlds | Exploit | - |  |
CVE-2021-43979** DISPUTED ** Styra Open Policy Agent (OPA) Gatekeeper through 3.7.0 mishandles concurrency, sometimes resulting in incorrect access control. The data replication mechanism allows policies to access the Kubernetes cluster state. During data replication, OPA/Gatekeeper does not wait for the replication to finish before processing a request, which might cause inconsistencies between the replicated resources in OPA/Gatekeeper and the resources actually present in the cluster. Inconsistency can later be reflected in a policy bypass. NOTE: the vendor disagrees that this is a vulnerability, because Kubernetes states are only eventually consistent. | CVSS 5.3 | Openpolicyagent | - | Patched |  |
CVE-2021-43839Cronos is a commercial implementation of a blockchain. In Cronos nodes running versions before v0.6.5, it is possible to take transaction fees from Cosmos SDK's FeeCollector for the current block by sending a custom crafted MsgEthereumTx. This problem has been patched in Cronos v0.6.5. There are no tested workarounds. All validator node operators are recommended to upgrade to Cronos v0.6.5 at their earliest possible convenience. | CVSS 7.5 | Crypto | - | Patched |  |
CVE-2021-43819Stargate-Bukkit is a mod for the minecraft video game which adds a portal focused environment. In affected versions Minecarts with chests will drop their items when teleporting through a portal; when they reappear, they will still have their items impacting the integrity of the game world. The teleport code has since been rewritten and is available in release `0.11.5.1`. Users are advised to upgrade. There are no known workarounds for this issue. | CVSS 5.3 | Stargate-bukkit project | - | Patched |  |
CVE-2021-41153The evm crate is a pure Rust implementation of Ethereum Virtual Machine. In `evm` crate `< 0.31.0`, `JUMPI` opcode's condition is checked after the destination validity check. However, according to Geth and OpenEthereum, the condition check should happen before the destination validity check. This is a **high** severity security advisory if you use `evm` crate for Ethereum mainnet. In this case, you should update your library dependency immediately to on or after `0.31.0`. This is a **low** severity security advisory if you use `evm` crate in Frontier or in a standalone blockchain, because there's no security exploit possible with this advisory. It is **not** recommended to update to on or after `0.31.0` until all the normal chain upgrade preparations have been done. If you use Frontier or other `pallet-evm` based Substrate blockchain, please ensure to update your `spec_version` before updating this. For other blockchains, please make sure to follow a hard-fork process before you update this. | CVSS 9.8 | Evm project | - | Patched |  |
CVE-2021-38019Insufficient policy enforcement in CORS in Google Chrome prior to 96.0.4664.45 allowed a remote attacker to leak cross-origin data via a crafted HTML page. | CVSS 6.5 | Fedoraproject, et al | - | Patched |  |
CVE-2021-37605In version 6.5 Microchip MiWi software and all previous versions including legacy products, the stack is validating only two out of four Message Integrity Check (MIC) bytes. | CVSS 7.5 | Microchip | - | Patched |  |
CVE-2021-37604In version 6.5 of Microchip MiWi software and all previous versions including legacy products, there is a possibility of frame counters being validated/updated prior to the message authentication. With this vulnerability in place, an attacker may increment the incoming frame counter values by injecting messages with a sufficiently large frame counter value and invalid payload. This results in denial of service/valid packets in the network. There is also a possibility of a replay attack in the stack. | CVSS 7.5 | Microchip | - | Patched |  |
CVE-2021-34767A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition. | CVSS 7.4 | Cisco | Exploit | Patched |  |
CVE-2021-32684magento-scripts contains scripts and configuration used by Create Magento App, a zero-configuration tool-chain which allows one to deploy Magento 2. In versions 1.5.1 and 1.5.2, after changing the function from synchronous to asynchronous there wasn't implemented handler in the start, stop, exec, and logs commands, effectively making them unusable. Version 1.5.3 contains patches for the problems. | CVSS 5.5 | Scandipwa | - | Patched |  |
CVE-2021-3011An electromagnetic-wave side-channel issue was discovered on NXP SmartMX / P5x security microcontrollers and A7x secure authentication microcontrollers, with CryptoLib through v2.9. It allows attackers to extract the ECDSA private key after extensive physical access (and consequently produce a clone). This was demonstrated on the Google Titan Security Key, based on an NXP A7005a chip. Other FIDO U2F security keys are also impacted (Yubico YubiKey Neo and Feitian K9, K13, K21, and K40) as well as several NXP JavaCard smartcards (J3A081, J2A081, J3A041, J3D145_M59, J2D145_M59, J3D120_M60, J3D082_M60, J2D120_M60, J2D082_M60, J3D081_M59, J2D081_M59, J3D081_M61, J2D081_M61, J3D081_M59_DF, J3D081_M61_DF, J3E081_M64, J3E081_M66, J2E081_M64, J3E041_M66, J3E016_M66, J3E016_M64, J3E041_M64, J3E145_M64, J3E120_M65, J3E082_M65, J2E145_M64, J2E120_M65, J2E082_M65, J3E081_M64_DF, J3E081_M66_DF, J3E041_M66_DF, J3E016_M66_DF, J3E041_M64_DF, and J3E016_M64_DF). | CVSS 4.2 | Yubico, et al | Exploit | - |  |
CVE-2021-1236Multiple Cisco products are affected by a vulnerability in the Snort application detection engine that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. The vulnerability is due to a flaw in the detection algorithm. An attacker could exploit this vulnerability by sending crafted packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. | CVSS 5.3 | Cisco, et al | - | Patched |  |
CVE-2021-0517In updateCapabilities of ConnectivityService.java, there is a possible incorrect network state determination due to a logic error in the code. This could lead to biasing of networking tasks to occur on non-VPN networks, which could lead to remote information disclosure, with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-179053823 | CVSS 7.5 | - | Patched |  | |
CVE-2021-0273An always-incorrect control flow implementation in the implicit filter terms of Juniper Networks Junos OS and Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 devices with affected Trio line cards allows an attacker to exploit an interdependency in the PFE UCODE microcode of the Trio chipset with various line cards to cause packets destined to the devices interfaces to cause a Denial of Service (DoS) condition by looping the packet with an unreachable exit condition ('Infinite Loop'). To break this loop once it begins one side of the affected LT interfaces will need to be disabled. Once disabled, the condition will clear and the disabled LT interface can be reenabled. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue only affects LT-LT interfaces. Any other interfaces are not affected by this issue. This issue affects the following cards: MPCE Type 3 3D MPC4E 3D 32XGE MPC4E 3D 2CGE+8XGE EX9200 32x10G SFP EX9200-2C-8XS FPC Type 5-3D FPC Type 5-LSR EX9200 4x40G QSFP An Indicator of Compromise (IoC) can be seen by examining the traffic of the LT-LT interfaces for excessive traffic using the following command: monitor interface traffic Before loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3759900268942 (1456 bps) [0] <---------- LT interface utilization is low Output bytes: 3759900344309 (1456 bps) [0] <---------- LT interface utilization is low After loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3765160313129 (2158268368 bps) [5260044187] <---------- LT interface utilization is very high Output bytes: 3765160399522 (2158266440 bps) [5260055213] <---------- LT interface utilization is very high This issue affects: Juniper Networks Junos OS on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960. Versions 15.1F6, 16.1R1, and later versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2. This issue does not affect the MX10001. This issue does not affect Juniper Networks Junos OS versions prior to 15.1F6, 16.1R1. Juniper Networks Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 19.4 versions prior to 19.4R2-EVO. This issue does not affect the MX10001. | CVSS 5.3 | Juniper | - | Patched |  |
CVE-2020-9425An issue was discovered in includes/head.inc.php in rConfig before 3.9.4. An unauthenticated attacker can retrieve saved cleartext credentials via a GET request to settings.php. Because the application was not exiting after a redirect is applied, the rest of the page still executed, resulting in the disclosure of cleartext credentials in the response. | CVSS 7.5 | Rconfig | Exploit | Patched |  |
CVE-2020-5753Signal Private Messenger Android v4.59.0 and up and iOS v3.8.1.5 and up allows a remote non-contact to ring a victim's Signal phone and disclose currently used DNS server due to ICE Candidate handling before call is answered or declined. | CVSS 5.3 | Signal | - | - |  |
CVE-2020-3885A logic issue was addressed with improved restrictions. This issue is fixed in iOS 13.4 and iPadOS 13.4, tvOS 13.4, Safari 13.1, iTunes for Windows 12.10.5, iCloud for Windows 10.9.3, iCloud for Windows 7.18. A file URL may be incorrectly processed. | CVSS 4.3 | Apple | - | Patched |  |
CVE-2020-36277Leptonica before 1.80.0 allows a denial of service (application crash) via an incorrect left shift in pixConvert2To8 in pixconv.c. | CVSS 7.5 | Fedoraproject, et al | Exploit | Patched |  |
CVE-2020-3596A vulnerability in the Session Initiation Protocol (SIP) of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect handling of incoming SIP traffic. An attacker could exploit this vulnerability by sending a series of SIP packets to an affected device. A successful exploit could allow the attacker to exhaust memory on an affected device, causing it to crash and leading to a DoS condition. | CVSS 7.5 | Cisco | - | Patched |  |
CVE-2020-35477MediaWiki before 1.35.1 blocks legitimate attempts to hide log entries in some situations. If one sets MediaWiki:Mainpage to Special:MyLanguage/Main Page, visits a log entry on Special:Log, and toggles the "Change visibility of selected log entries" checkbox (or a tags checkbox) next to it, there is a redirection to the main page's action=historysubmit (instead of the desired behavior in which a revision-deletion form appears). | CVSS 5.3 | Mediawiki, et al | Exploit | Patched |  |
CVE-2020-26506An Authorization Bypass vulnerability in the Marmind web application with version 4.1.141.0 allows users with lower privileges to gain control to files uploaded by administrative users. The accessed files were not visible by the low privileged users in the web GUI. | CVSS 4.3 | Marmind | Exploit | - |  |
CVE-2020-25603An issue was discovered in Xen through 4.14.x. There are missing memory barriers when accessing/allocating an event channel. Event channels control structures can be accessed lockless as long as the port is considered to be valid. Such a sequence is missing an appropriate memory barrier (e.g., smp_*mb()) to prevent both the compiler and CPU from re-ordering access. A malicious guest may be able to cause a hypervisor crash resulting in a Denial of Service (DoS). Information leak and privilege escalation cannot be excluded. Systems running all versions of Xen are affected. Whether a system is vulnerable will depend on the CPU and compiler used to build Xen. For all systems, the presence and the scope of the vulnerability depend on the precise re-ordering performed by the compiler used to build Xen. We have not been able to survey compilers; consequently we cannot say which compiler(s) might produce vulnerable code (with which code generation options). GCC documentation clearly suggests that re-ordering is possible. Arm systems will also be vulnerable if the CPU is able to re-order memory access. Please consult your CPU vendor. x86 systems are only vulnerable if a compiler performs re-ordering. | CVSS 7.8 | Xen, et al | - | Patched |  |
CVE-2020-25598An issue was discovered in Xen 4.14.x. There is a missing unlock in the XENMEM_acquire_resource error path. The RCU (Read, Copy, Update) mechanism is a synchronisation primitive. A buggy error path in the XENMEM_acquire_resource exits without releasing an RCU reference, which is conceptually similar to forgetting to unlock a spinlock. A buggy or malicious HVM stubdomain can cause an RCU reference to be leaked. This causes subsequent administration operations, (e.g., CPU offline) to livelock, resulting in a host Denial of Service. The buggy codepath has been present since Xen 4.12. Xen 4.14 and later are vulnerable to the DoS. The side effects are believed to be benign on Xen 4.12 and 4.13, but patches are provided nevertheless. The vulnerability can generally only be exploited by x86 HVM VMs, as these are generally the only type of VM that have a Qemu stubdomain. x86 PV and PVH domains, as well as ARM VMs, typically don't use a stubdomain. Only VMs using HVM stubdomains can exploit the vulnerability. VMs using PV stubdomains, or with emulators running in dom0, cannot exploit the vulnerability. | CVSS 5.5 | Xen, et al | - | Patched |  |
CVE-2020-1914A logic vulnerability when handling the SaveGeneratorLong instruction in Facebook Hermes prior to commit b2021df620824627f5a8c96615edbd1eb7fdddfc allows attackers to potentially read out of bounds or theoretically execute arbitrary code via crafted JavaScript. Note that this is only exploitable if the application using Hermes permits evaluation of untrusted JavaScript. Hence, most React Native applications are not affected. | CVSS 9.8 | - | Patched |  | |
CVE-2020-17466Turcom TRCwifiZone through 2020-08-10 allows authentication bypass by visiting manage/control.php and ignoring 302 Redirect responses. | CVSS 9.8 | Turcom | Exploit | Patched |  |
CVE-2019-9946Cloud Native Computing Foundation (CNCF) CNI (Container Networking Interface) 0.7.4 has a network firewall misconfiguration which affects Kubernetes. The CNI 'portmap' plugin, used to setup HostPorts for CNI, inserts rules at the front of the iptables nat chains; which take precedence over the KUBE- SERVICES chain. Because of this, the HostPort/portmap rule could match incoming traffic even if there were better fitting, more specific service definition rules like NodePorts later in the chain. The issue is fixed in CNI 0.7.5 and Kubernetes 1.11.9, 1.12.7, 1.13.5, and 1.14.0. | CVSS Low | Cncf, et al | - | Patched |  |
CVE-2019-20430In the Lustre file system before 2.12.3, the mdt module has an LBUG panic (via a large MDT Body eadatasize field) due to the lack of validation for specific fields of packets sent by a client. | CVSS 7.5 | Lustre | Exploit | Patched |  |
CVE-2019-19729An issue was discovered in the BSON ObjectID (aka bson-objectid) package 1.3.0 for Node.js. ObjectID() allows an attacker to generate a malformed objectid by inserting an additional property to the user-input, because bson-objectid will return early if it detects _bsontype==ObjectID in the user-input object. As a result, objects in arbitrary forms can bypass formatting if they have a valid bsontype. | CVSS 7.5 | Bson-objectid project | Exploit | - |  |
CVE-2019-19324Xmidt cjwt through 1.0.1 before 2019-11-25 maps unsupported algorithms to alg=none, which sometimes leads to untrusted accidental JWT acceptance. | CVSS 7.5 | Xmidt | - | Patched |  |
CVE-2019-17192** DISPUTED ** The WebRTC component in the Signal Private Messenger application through 4.47.7 for Android processes videoconferencing RTP packets before a callee chooses to answer a call, which might make it easier for remote attackers to cause a denial of service or possibly have unspecified other impact via malformed packets. NOTE: the vendor plans to continue this behavior for performance reasons unless a WebRTC design change occurs. | CVSS 9.8 | Signal | - | - |  |
CVE-2019-11412An issue was discovered in Artifex MuJS 1.0.5. jscompile.c can cause a denial of service (invalid stack-frame jump) because it lacks an ENDTRY opcode call. | CVSS 7.5 | Fedoraproject, et al | - | Patched |  |
CVE-2018-19212In libwebm through 2018-10-03, there is an abort caused by libwebm::Webm2Pes::InitWebmParser() that will lead to a DoS attack. | CVSS Low | Webmproject | Exploit | - |  |
CVE-2018-19058An issue was discovered in Poppler 0.71.0. There is a reachable abort in Object.h, will lead to denial of service because EmbFile::save2 in FileSpec.cc lacks a stream check before saving an embedded file. | CVSS 6.5 | Debian, et al | Exploit | - |  |
CVE-2018-16766In WAVM through 2018-07-26, a crafted file sent to the WebAssembly Virtual Machine may cause a denial of service (application crash) or possibly have unspecified other impact because Errors::unreachable() is reached. | CVSS Low | Webassembly virtual machine project | Exploit | Patched |  |
CVE-2017-0604An elevation of privilege vulnerability in the kernel Qualcomm power driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as Critical due to the possibility of a local permanent device compromise, which may require reflashing the operating system to repair the device. Product: Android. Versions: N/A. Android ID: A-35392981. References: QC-CR#826589. | CVSS Low | - | Patched |  | |
CVE-2014-2686Ansible prior to 1.5.4 mishandles the evaluation of some strings. | CVSS 7.5 | Redhat | - | - |